Perbaikan Kinerja Defect free supply chain Dengan Pendekatan Simulasi Model System Dynamics (Studi Kasus: PT. NPC)
DOI:
https://doi.org/10.37631/jri.v7i1.1746Keywords:
Supply Chain, Defect Free, Seven Tools, Dynamic Simulation, PerformanceAbstract
The garment industry plays an important role in supporting the Indonesian economy with a significant growth of 15.08% in 2019. This study aims to reduce the defect rate at Line 9 Factory C, PT. NPC to strengthen supply chain performance, especially performance related to the defect free supply chain. This study will explore in detail the production defect rate using the Seven Tools approach and design a defect reduction strategy with a Dynamic System Simulation approach. The Seven Tools method helps identify dominant defects such as Poor Shape, Open Seam, and Broken Stitch through Check Sheet, Pareto, and Fishbone Diagram analysis. The simulation results show that the Company's existing condition has an average defect rate of 12.15%, exceeding the company's target of less than 10%. The proposed strategic steps are to conduct interventions in the form of intensive training for operators and the addition of Inline QC officers. The simulation results show that training reduces the defect rate by 0.70%, while the addition of Inline QC officers reduces the defect rate by 1.16%. The combination of both strategies resulted in the largest reduction in defect rates of up to 1.34%, indicating a positive direction of improvement towards the company's target. The implementation of quality control strategies not only increased operational efficiency, but also increased the company's supply chain performance.
References
Agustian, K., Maksum, C., Zen, A., Sekarini, R. A., & Malik, A. J. (2023). Evaluation of the Effectiveness of Statistical Management Tools in Improving the Performance of Business Organisations. Journal of Contemporary Administration and Management (ADMAN), 1(2), 118–127. https://doi.org/10.61100/adman.v1i2.56
Alfadilah, H., Hadining, A. F., & Hamdani, H. (2022). Pengendalian Kualitas Produk Cacat Piece Pivot pada PT. Trijaya Teknik Karawang Menggunakan Seven tool dan Analisis Kaizen. Jurnal Serambi Engineering, 7(1). https://doi.org/10.32672/jse.v7i1.3667
Antony, J., McDermott, O., Sony, M., Fernandes, M. M., & Ribeiro, R. V. C. (2021). A study on the Ishikawa’s original basic tools of quality control in South American companies: results from a pilot survey and directions for further research. The TQM Journal, 33(8), 1770–1786. https://doi.org/10.1108/TQM-01-2021-0004
Arsiwi, P., & Adi, P. W. (2020). Interpretive Structural Modelling Untuk Meningkatkan Daya Saing Rantai Pasok UKM Mina Indo Sejahtera. Jurnal PASTI, 14(1). https://doi.org/10.22441/pasti.2020.v14i1.003
Dehbozorgi, R., Shahriari, M., Fereidooni-Moghadam, M., & Moghimi-Sarani, E. (2023). Family-centered collaborative care for patients with chronic mental illness: A systematic review. Journal of Research in Medical Sciences, 28(1). https://doi.org/10.4103/jrms.jrms_410_22
Gong, C. (2023). Supply chain management practices, competitive advantages and business performance of small and medium enterprises in China: Basis to develop an improved supply chain management framework. International Journal of Research Studies in Management, 11(6). https://doi.org/10.5861/ijrsm.2023.1076
Hoque, I., & Maalouf, M. M. (2022). Quality intervention, supplier performance and buyer–supplier relationships: evidence from the garment industry. Benchmarking: An International Journal, 29(8), 2337–2358. https://doi.org/10.1108/BIJ-02-2021-0075
Jun, X., Wang, J., Zhou, J., Meng, S., Pan, R., & Gao, W. (2021). Fabric defect detection based on a deep convolutional neural network using a two-stage strategy. Textile Research Journal, 91(1–2), 130–142. https://doi.org/10.1177/0040517520935984
Kristanto Mulyono, & Yeni Apriyani. (2021). Analisis Pengendalian Qualitas Produk Dengan Metode SQC (Statistical Quality Control). JENIUS : Jurnal Terapan Teknik Industri, 2(1), 41–50. https://doi.org/10.37373/jenius.v2i1.93
Kurnia, H., Setiawan, S., & Hamsal, M. (2021). Implementation of statistical process control for quality control cycle in the various industry in Indonesia: A systematic literature review. Operations Excellence: Journal of Applied Industrial Engineering, 13(2), 194. https://doi.org/10.22441/oe.2021.v13.i2.018
Law, A. M. (2022). How to Build Valid and Credible Simulation Models. 2022 Winter Simulation Conference (WSC), 1283–1295. https://doi.org/10.1109/WSC57314.2022.10015411
Lesmana, T. (2023). Impact of Supply Chain Integration, Supplier Collaboration, and Quality Management on the Performance of Manufacturing Companies in Indonesia (Case Study of a Manufacturing Company in West Java). West Science Interdisciplinary Studies, 1(05), 68–76. https://doi.org/10.58812/wsis.v1i05.75
Marlina, W. A., Armijal, A., & Arasid, D. W. (2024). Analisis Pengendalian Kualitas Dengan Menggunakan Metode Seven Tools Di Usaha Gula Aren Saka Halaban Sumatera Barat. Integrasi: Jurnal Ilmiah Teknik Industri, 9(1), 1–8.
Mulyani, S., & Basrowi, B. (2024). The effect of environmentally oriented leadership and public sector management quality on supply chain performance: The moderating role of public sector environmental policy. Uncertain Supply Chain Management, 12(1), 471–480. https://doi.org/10.5267/j.uscm.2023.9.005
Nur Latifah, Y., Indhira P. Susanto, Nabila I. Mulia, & Isna Nugraha. (2022). Analisis Pengendalian Kualitas Produk Roti Ud. Xyz Dengan Total Quality Control (TQC). WALUYO JATMIKO PROCEEDING, 15(1), 180–185. https://doi.org/10.33005/waluyojatmiko.v15i1.41
Nurhayani, N. (2022). Analisis sektor industri manufaktur di Indonesia. Jurnal Paradigma Ekonomika, 17(3), 713–722.
Nursyamsi, I., & Momon, A. (2022). Analisa Pengendalian Kualitas Menggunakan Metode Seven Tools Untuk Meminimalkan Return Konsumen di PT. XYZ. Jurnal Serambi Engineering, 7(1).
Rufaidah, A., & Rosyidi, Moh. R. (2022). Analisis Pengendalian Kualitas Kerupuk dengan Metode Seven Tools. Jurnal Optimalisasi, 8(2), 154. https://doi.org/10.35308/jopt.v8i2.6128
Sari, S. A., Indriani, S., & A, Salammia. L. (2022). Penerapan Metode Seven Tools untuk Pengendalian Kualitas Produk Minuman Pada UMKM Sari Buah Naga Phitay. Prosiding SENIATI, 6(3), 527–534. https://doi.org/10.36040/seniati.v6i3.5090
Setyawan Firmansyah, H., & Siagian, H. (2022). Impact of Information Sharing on Supply Chain Performance through Supplier Quality Management, Supply Chain Agility, and Supply Chain Innovation. Petra International Journal of Business Studies, 5(2), 119–131. https://doi.org/10.9744/ijbs.5.2.119-131
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Agus Mansur, Muhammad Rifki, Fadhil Adita Ramadhan Ramadhan
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License
